Advances in Wireless Network Essay Example | Topics and Well Written Essays - 2500 words

Advances in Wireless Network - Essay Example People have now mobile with most of the functions that were never thought when wireless technologies emerged. The basic functions of voice and text communications are considered as the basic functions that early mobiles phones had, but the most modern mobile phones (also known as smart phones) are equipped with Wifi communication, Bluetooth communication, near field communication (NFC) and data communication systems along with basic systems. 1. 802.11n Wireless connections are always determined by the radio mode the communication system is utilizing. The mode of radio signal described by the 802.11n access point provides support for 802.11b, 802.11g, 802.11a, 802.11n receptors. The wireless signal can be sent to a number of users at the same time. The 802.11n is capable of supporting and operating at two different frequencies to support to different clients with different operating frequencies. An Access Point of 5GHz is designed 5GHz and an Access Pint of 2.4 GHz is designed to prov ide communication to the clients, whom are operating at 2.4GHz (Juniper.net, 2009). The channel band width of the 802.11n is 40MHz. The technology is assumed to be much compatible with the device, as the functions promised by the marketing will remain incomplete without the use of 802.11n (Wewetzer, C. et al., 2012). As, the ‘HyperSlim PX’ has to provide with all possible wireless types of communication, the 802.11n will be the best suited communication. From the engineering perspective the communication type requires software to run that can be corrupt by the influence of other types of wireless communications’ software installed in the HyperSlim PX. The most important perspective is to couple the existing software with some auto backup system to avoid loss of important data in case of any software malfunction. The HyperSlim PX should be made in metallic body to provide a sink for the heat generated during the operation of the 802.11n. As, the access point of 80 2.11n utilized in the HyperSlim PX will convert some amount of energy into heat, the HyperSlim PX will consume much amount of energy to provide enough power for the communication system to work in a proper manner. There are less or no problems regarding the security of the data while utilizing the 802.11n. The maximum transmission rate remains as high as 270 Mbps, which is fairly a higher speed for the communication modal. On the other hand the enhancement in the range of the device will keep the user connected while in motion in a building or a factory building. Protection The Specification that are utilized in the set protocols 802.11n ensures that the communication modal do not report interference to any of the device nearby and do not allow the interference of the any other communication to distort the communication of through the 802.11n. It protection strategy also ensures that it is interfere or accept the interference of any other access points or any legacy stations. On the other hand, users have the right to turn on and off the security feature that are defiantly installed in the 802.11n communication modal. By considering these safety and protection features, the 802.11n is much feasible in the HuperSlim-PX. The performance of the device remains the same in the both the condition, with the full fledged protection and with no protection. The protection strategies of the device have low impact on the device capability of the high speed connection and transmission. 2. Bluetooth 4.0 Bluetooth is a communication type